Cloud Environment Parameters
The parameters relating to when the device is deployed in a cloud environment are described in the table below.
Cloud Environment Parameters
Parameter |
Description |
||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
'AWS EC2 Endpoint' configure network > network-settings > aws-ec2-endpoint [AwsEc2Endpoint] |
Defines the Amazon Web Services (AWS) EC2 endpoint name. The parameter can be configured to one of the following values:
Note: High-Availability (HA) deployments in AWS environments use AWS EC2 API to implement IP failover. If two SBC instances are deployed in separate availability zones within the same region, the same AWS EC2 API endpoint will be used for both availability zones. In such a scenario, all traffic towards the AWS EC2 API endpoint will flow through the first availability zone, even for virtual machines deployed in the second availability zone.
Note: The parameter is applicable only to |
||||||||||||
configure network > network-settings > interface-status-check [NetworkInterfaceStatusCheck] |
When the device is deployed in Azure cloud, it may experience intermittent problems in communication with virtual hosts that may cause the virtual network interface (NIC) to "freeze". To overcome this issue, the device can periodically check the status of all network interfaces to detect if this condition exists and mitigate it by performing a maintenance reboot.
Note: The parameter is applicable only to |
||||||||||||
'Maintenance Events Monitoring Enable' configure network > cloud-settings > monitoring-maintenance-events [MaintenanceEventsMonitoringEnable] |
Enables the device to monitor the cloud platform's scheduled maintenance events for virtual machines on which the device is installed.
For more information, see Monitoring Cloud Scheduled VM Maintenance Events. Note: The parameter is applicable only to |
||||||||||||
'Maintenance Events Treatment Enable' configure network > cloud-settings > treatment-maintenance-events [MaintenanceEventsTreatmentEnable] |
Enables the device to perform a switchover (active to standby for HA systems
For more information, see Monitoring Cloud Scheduled VM Maintenance Events. Note:
|